Steel-Look Windows: Are They Worth It? Pros and Cons
Steel-look windows are worth the extra cost when the slim grid is the reason you want them and the house suits it. That means a rear extension on a Victorian or Edwardian house, an interwar home, a modern build, or glazed internal doors and screens. They are poor value if all you need is the cheapest replacement that meets the rules, and a listed building or conservation area may limit what you can fit.

Steel-look describes the look: slim dark frames that divide the glass into a grid of small panes. It copies the steel windows once common in factories and in homes built in the early twentieth century (Historic England), and you will also see it sold as heritage style glazing. Today the look comes in steel or in aluminium, with the same grid on doors and internal screens. We make industrial style windows in steel or in lower-cost steel-look aluminium. Many people call this slim look "Crittall style". Crittall is a registered trade mark of Crittall Windows Ltd, and No1 London is not affiliated with Crittall Windows Ltd. The rules below apply to England.
Are steel-look windows worth it?
Yes, when the look is the reason you are buying and the budget allows for it. In return you accept a higher price, a longer wait and a busier view.
What are the pros of steel-look windows?
- Slim sightlines: metal is strong, so thin frames can hold large panes and more of the opening is glass
- Easy upkeep: aluminium usually needs little more than wiping clean and a check of the seals and hardware
What are the cons of steel-look windows?
- Cost: made-to-order frames usually cost more than standard aluminium or uPVC
- View: every bar cuts across it, and a dense grid can look busy from the sofa
- Lead time: made to measure, so the wait usually runs longer than for standard sizes
Do not count on them to add value when you sell. Buyers may like the look, but treat any boost to the sale price as a bonus.
Which homes suit steel-look windows?
Match the grid to the house rather than to a photo. A pattern that echoes something already there, such as the divisions of the original sashes, usually looks right; a dense grid on plain modern frames can look forced.
| Home | Fit | Why |
|---|---|---|
| Back or side return of a Victorian or Edwardian house | Good | Sits well with brick and a new extension |
| Interwar house | Good | Steel windows were common then |
| Modern extension or new build | Good | Slim frames pay off on big openings |
| Front of a Georgian, Victorian or Edwardian house | Usually not | Sashes belong there; a new style may need permission |
| Listed building or conservation area | Ask first | Extra consent or limits are possible |
| Flat | Check your lease | The freeholder may control the exterior |

Steel or aluminium: which should you choose?
Steel is the original material and usually costs more. Aluminium copies the look at a lower cost and is widely used in homes today; our industrial style windows come in both, with steel-look aluminium the lower-cost option.
| Feature | Steel | Aluminium |
|---|---|---|
| Look | Closest to the original, often the slimmest lines | Very close, sections can be a little deeper |
| Cost | Usually higher | Usually lower |
| Upkeep | Coating must be kept intact | Wipe clean; check seals and hardware |
For most homes, aluminium windows are the practical choice because they usually cost less and need less upkeep. Steel makes sense if the house had steel windows originally, if you want the finest lines and accept the cost and the coating upkeep, or if the council asks for like-for-like.
Can you use the steel look for internal doors and screens?
Yes. Glazed internal doors and fixed industrial style screens let light run between a hall, kitchen and dining room while keeping the rooms separate.
- Safety glass: glass in or beside a door usually needs to be safety glass, such as toughened or laminated (Approved Document K), so check what the quote says is fitted; our guide to types of doors explains the rule
- Fire: if a loft conversion adds a floor high above the ground, Approved Document B asks for fire-resisting doors and partitions along the escape route, or a sprinkler-based alternative, and an ordinary glazed screen on a fire-resisting route would normally need fire-rated glass; we make glazed FD30 fire doors in the industrial style
- Survey: have it measured once floor and ceiling finishes are settled, because a screen made to the wrong height will not fit


How much do steel-look windows cost?
Usually more than standard windows. The HomeOwners Alliance guide to replacing windows, updated 8 October 2026, gives UK averages credited to Checkatrade of £325 for a uPVC window and £475 for an aluminium one. Treat both as indicative only: the Checkatrade figures are undated and VAT is not stated. They are general averages, not prices for steel-look frames, which usually cost more again.
What moves a quote:
- Number of bars: each adds work and glass edges, so fewer, larger panes usually cost less
- Material: steel usually costs more than aluminium
- Size: tall doors and wide runs mean bigger glass and heavier handling
- Fitting: access, scaffolding for upper floors, and making good plaster and window boards
Are steel-look windows energy efficient?
They can be, but "steel-look" describes a look, not a performance. In England a replacement window should meet the same energy standard (Approved Document L) whatever the frame is made of, and our guide to types of windows sets out the standard, the vents and the escape openings.
Metal frames typically lose more heat than the glass beside them, so a window with many bars can have a worse whole-window figure than the same opening with fewer (Historic England). Ask for the certified figure for the exact window, bars included (a lower U-value means less heat lost), and whether the frame has a thermal break, the insulating layer inside a metal section. The glazing matters as much, so ask for the double or triple glazing specification too.
If you already have original steel windows, have each one surveyed before you choose between repair and new windows (Historic England explains when older windows can be repaired).
What should you pin down before ordering steel-look windows?
- Material: ask what the frame is made of. "Steel-look" is a description, not a specification, and the words are used for several different products.
- Bars and frame width: ask whether the bars are real or applied, look at a corner sample, and sign off a drawing showing the visible frame width and every bar position. Bars that fail to line up across a run of windows and doors, or land at handle height, are easy to get wrong.
- Performance: ask for the certified U-value or Window Energy Rating of the exact window, with the glass specification and whether the frame has a thermal break.
- Openings: in a gridded window the part that opens can be a single small cell, and an upstairs bedroom window usually needs an opening big enough to climb out of. Ask for the clear opening, vents and safety glass to be confirmed on the quote.
- Bigger openings: widening one needs structural support above it, and the energy rules also cap the total area of windows and doors unless you make up for it elsewhere. Ask your designer or builder to check both first.
- Lead time and survey: get the lead time in writing, and have the frames surveyed once the openings are built, not from a drawing.
- Installer: a registered installer can certify the work, so ask which competent person scheme they are on; the government list of schemes shows the current ones, and the scheme itself can confirm the registration.
- Quotes: compare like for like, with the same material, bars, glass and finish, and extras such as removing old windows and making good.
Frequently Asked Questions
What is the difference between real and applied glazing bars?
Real bars are frame sections that divide the window into separate panes, which gives the true steel-window look and more edges to clean. Applied bars are strips fixed on or inside a single large pane, so they usually cost less and are easier to clean, but they can look flat from an angle.
Can steel-look windows be a colour other than black?
Yes. Aluminium is powder-coated in many colours, and a different colour inside and out is possible. Ask for a sample and look at it in the room's own light.
Do I need permission to fit steel-look windows?
Usually not for new windows of similar appearance to those the house was built with, according to the Planning Portal, but a different style may need it. In a listed building or conservation area, ask your council before you order, and in a flat the usual householder rights do not apply (Planning Portal). Our guide to types of windows has the other rules.
Can I mix steel-look windows with other frames in the same house?
Yes. Some homes use the style at the back or in an extension and keep something else elsewhere. Ask for corner samples of both and compare frame depth and colour, because they may not match exactly. For the other materials, see uPVC vs aluminium windows and aluminium vs wooden windows.
Sources
- Approved Document L: Conservation of fuel and power, Volume 1: Dwellings, Ministry of Housing, Communities and Local Government, 2021 edition incorporating 2023 amendments
- Approved Document L: Energy and greenhouse gas emissions, Volume 1: Dwellings, Ministry of Housing, Communities and Local Government, 2026 edition, takes effect on 24 March 2027
- Approved Document B: Fire safety, Volume 1: Dwellings, Ministry of Housing, Communities and Local Government, 2019 edition incorporating 2020, 2022, 2025 and 2026 amendments
- Approved Document K: Protection from falling, collision and impact, Ministry of Housing, Communities and Local Government, 2013 edition
- Doors and windows: planning permission, Planning Portal, accessed 8 November 2026
- Flats and maisonettes: introduction, Planning Portal, accessed 8 November 2026
- Traditional Windows: their care, repair and upgrading, Historic England, published 8 February 2017
- Repair or Change Windows in an Older Home, Historic England, updated 23 July 2024
- Competent person scheme: current schemes and how schemes are authorised, Ministry of Housing, Communities and Local Government, updated 17 September 2026
- Replacing windows: what to expect, HomeOwners Alliance, updated 8 October 2026
Final Thoughts
A grid that looks right in a photo can feel heavy in the room, so judge the bar spacing and frame depth on a sample. You can compare samples with our specialists at the showroom in Fulham.
Once you have a free estimate for your own windows, check its material, bars, glass and lead time against the list above.
Choose steel-look windows where the look is the point, then get the material, bars and certified U-value in writing before you pay a deposit.



