- Runs on a Track
- No Swing Space
- Slim Frames
- Large Panes
Sliding doors run on a track, so nothing swings into the room or the garden. We make them to measure in aluminium, timber or uPVC for homes and rear extensions in London.
- How they open
- Panels run on a track and glide past each other
- Materials
- Aluminium, timber or uPVC
- Industrial style
- Also made with slim frames and glazing bars
How do sliding doors work?
The panels sit on a track and glide past each other. Nothing opens into the room or out onto the terrace, so the floor on both sides stays free.
A slim frame carries a large pane. That is why sliding doors are common on rear extensions and wide openings onto the garden.
How much of a sliding door opens?
On a standard two panel set, half the width. One panel is usually fixed and the other slides in front of it.
If you want more of the opening clear, read our bi-fold doors page. It sets the two side by side.

What is the central bar on a sliding door?
It is the upright where two panels meet. With the doors shut, it is the part of the frame you see most.
So compare its width before you choose. Frame samples are in our Fulham showroom.
Which material gives the slimmest frames?
Usually aluminium. It also takes the biggest panes. We make sliding doors in timber and uPVC as well, and frames can be finished in RAL colours.
For the look of steel, we make steel-look sliding doors with slim frames and glazing bars. They are aluminium. The same doors in steel are the more expensive option, and you can see both among our industrial style frames. Many people call this slim look "Crittall style". Crittall is a registered trade mark of Crittall Windows Ltd, and No1 London is not affiliated with Crittall Windows Ltd.
How do you look after sliding doors?
Keep the track and the drainage slots clear of grit. A mild soap and water is all the frames need.
Now and then, check the seals, the handles and the rollers.
Fitting new windows at the same time? See sash windows, or go back to all doors.
Want to compare the frames?
Frame samples are on show in our Fulham showroom. Bring the size of your opening and we can start on a price.
How it works
-
Initial Quote or Site Visit
Send us the size of the opening for an initial price, or book a free site survey.
-
Design & Final Survey
Choose how many panels slide, the frame material and colour, and the glass, then we take the final measurements.
-
Precision Manufacture
The frame, track and panels are built to the size of your opening.
-
Professional Installation
Our team fits the frame level, sets the rollers and checks the locks and the seal at the threshold.
Sliding Doors by No1 London
See more in our galleryCommon questions
How much room do sliding doors need?
None to swing. The panels run along a track, so furniture can stand close to the glass inside and out.
Do both panels of a sliding door open?
Usually not. On a standard two panel set one panel is fixed and the other slides, so half the width opens.
What are sliding door frames made from?
Aluminium, timber or uPVC. Aluminium usually gives the slimmest frames and the biggest panes.
How do I look after sliding doors?
Keep the track and the drainage slots free of grit, and clean the frames with a mild soap and water. Check the seals, handles and rollers from time to time.
What should I look at on a frame sample?
The sightline, which is the width of frame you can see, and the central bar where two panels meet. Both are easier to judge on a sample than in a photo.
Can sliding doors have glazing bars?
Yes. Our steel-look sliding doors have slim frames and glazing bars. They are aluminium, and the same doors are made in steel.
Get in touch Get Your Free Estimate.
Loading the map may set cookies from Google.






